VMware Cloud Professional (VCP-VMC) practice questions

1. Question 1 of 25

   Select 2

   A cloud administrator wants to migrate a virtual machine using VMware vSphere vMotion from their on-premises data center to their VMware Cloud on AWS software-defined data center (SDDC), using an existing private line to the cloud SDDC. Which two requirements must be met before the migration can occur? (Choose two.)

   • AThe versions of VMware vSphere need to match between the on-premises data center and the cloud SDDC.
   • BA Layer 2 connection is configured between the on-premises data center and the cloud SDDC.
   • CAWS Direct Connect is configured between the on-premises data center and the cloud SDDC.
   • DIPsec VPN is configured between the on-premises data center and the cloud SDDC.
   • ECluster-level Enhanced vMotion Compatibility (EVC) is configured in the on-premises data center and the cloud SDDC.

   Show answer

   Correct answer: C, D

   How others answered

   • CD83%
   • BC17%

   Explanation

   For a successful vMotion migration from the on-premises data center to VMware Cloud on AWS software-defined data center (SDDC), the following requirements need to be met: B. A Layer 2 connection is configured between the on-premises data center and the cloud SDDC. This is because vMotion between on-premises and VMware Cloud on AWS requires the VM to retain its IP address, so a Layer 2 connection is needed. E. Cluster-level Enhanced vMotion Compatibility (EVC) is configured in the on-premises data center and the cloud SDDC. EVC ensures that VMs remain compatible with the hosts in both the source and target locations. This means even if there are CPU discrepancies between on-premises and VMware Cloud on AWS hosts, VMs can still be migrated without issues.

   Adapted from community discussion by Manu62 · 2023-10-17 · 5 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

   Supporting references

   • docs.vmware.com documentation

   View community discussion4

   Candidate context

   Question 1 discussion

   These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

   1. M

      Manu62

      2023-10-17

      5 upvotes

      For a successful vMotion migration from the on-premises data center to VMware Cloud on AWS software-defined data center (SDDC), the following requirements need to be met: B. A Layer 2 connection is configured between the on-premises data center and the cloud SDDC. This is because vMotion between on-premises and VMware Cloud on AWS requires the VM to retain its IP address, so a Layer 2 connection is needed. E. Cluster-level Enhanced vMotion Compatibility (EVC) is configured in the on-premises data center and the cloud SDDC. EVC ensures that VMs remain compatible with the hosts in both the source and target locations. This means even if there are CPU discrepancies between on-premises and VMware Cloud on AWS hosts, VMs can still be migrated without issues.

   2. M

      Marioalfo2

      2023-03-10

      Selected C, D4 upvotes

      Hybrid Migration with vMotion Checklist:https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-operations/GUID-1A175E91-2317-4261-A63E-B398D92ECE8D.html

   3. E

      ertin74

      2023-03-13

      2 upvotes

      A and E are definitely wrong, B is misleading (L2 'connection' not L2VPN) so it must be CD based on https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-operations/GUID-1A175E91-2317-4261-A63E-B398D92ECE8D.html

   4. R

      ruan19812022

      2024-05-01

      Selected C, D1 upvote

      E is not supported on AWS, EVC cannot be enabled on cloud SDDC, A; versions do not need to match, min on prem is 6.7. B; trick answer if it said L2VPN it could be correct. Only C and D are remaining correct answers

2. Question 2 of 25

   Which out-of-the-box role is required in order to create a content library in VMware Cloud on AWS?

   • ACloudGlobalAdmin
   • BCloudAdmin
   • CActive Directory ESXi Admin
   • D[email protected]

   Show answer

   Correct answer: B

   How others answered

   • B88%

   Explanation

   The CloudAdmin role has the following privileges in SDDC Version 1.18. ContentLibrary.AddCertToTrustStore ContentLibrary.AddLibraryItem ContentLibrary.CheckInTemplate ContentLibrary.CheckOutTemplate ContentLibrary.CreateLocalLibrary ContentLibrary.CreateSubscribedLibrary ContentLibrary.DeleteCertFromTrustStore ContentLibrary.DeleteLibraryItem ContentLibrary.DeleteLocalLibrary ContentLibrary.DeleteSubscribedLibrary ContentLibrary.DownloadSession ContentLibrary.EvictLibraryItem ContentLibrary.EvictSubscribedLibrary ContentLibrary.GetConfiguration ContentLibrary.ImportStorage ContentLibrary.ProbeSubscription ContentLibrary.ReadStorage ContentLibrary.SyncLibrary ContentLibrary.SyncLibraryItem ContentLibrary.TypeIntrospection ContentLibrary.UpdateConfiguration ContentLibrary.UpdateLibrary ContentLibrary.UpdateLibraryItem ContentLibrary.UpdateLocalLibrary ContentLibrary.UpdateSession ContentLibrary.UpdateSubscribedLibrary https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-DFB3C048-5728-4DE9-9380-7240748875C3.html

   Adapted from community discussion by bachusPL · 2023-09-11 · 9 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

   Supporting references

   • docs.vmware.com documentation
   • docs.vmware.com documentation
   • docs.vmware.com documentation

   View community discussion4

   Candidate context

   Question 2 discussion

   These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

   1. B

      bachusPL

      2023-09-11

      Selected B9 upvotes

      The CloudAdmin role has the following privileges in SDDC Version 1.18. ContentLibrary.AddCertToTrustStore ContentLibrary.AddLibraryItem ContentLibrary.CheckInTemplate ContentLibrary.CheckOutTemplate ContentLibrary.CreateLocalLibrary ContentLibrary.CreateSubscribedLibrary ContentLibrary.DeleteCertFromTrustStore ContentLibrary.DeleteLibraryItem ContentLibrary.DeleteLocalLibrary ContentLibrary.DeleteSubscribedLibrary ContentLibrary.DownloadSession ContentLibrary.EvictLibraryItem ContentLibrary.EvictSubscribedLibrary ContentLibrary.GetConfiguration ContentLibrary.ImportStorage ContentLibrary.ProbeSubscription ContentLibrary.ReadStorage ContentLibrary.SyncLibrary ContentLibrary.SyncLibraryItem ContentLibrary.TypeIntrospection ContentLibrary.UpdateConfiguration ContentLibrary.UpdateLibrary ContentLibrary.UpdateLibraryItem ContentLibrary.UpdateLocalLibrary ContentLibrary.UpdateSession ContentLibrary.UpdateSubscribedLibrary https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-DFB3C048-5728-4DE9-9380-7240748875C3.html

   2. T

      tripinha

      2024-02-25

      Selected B2 upvotes

      The Answer is B - CloudAdmin SDDC vCenter Roles CloudAdmin The CloudAdmin role has the privileges necessary to create and manage SDDC workloads and related objects such as storage policies, content libraries, vSphere tags, and resource pools. This role cannot access or configure objects that are supported and managed by VMware, such as hosts, clusters, and management virtual machines. The CloudAdmin role can create, clone, or modify non-default roles. For detailed information about the privileges assigned to this role, see CloudAdmin Privileges. CloudGlobalAdmin The CloudGlobalAdmin role is an internal role that must exist during SDDC deployment but can be removed by a CloudAdmin after deployment is complete. https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-operations/GUID-7458E592-FC6E-43A8-B0BE-505B1435D12D.html

   3. S

      soehein

      2023-10-21

      1 upvote

      Ans: A VMware Cloud on AWS includes two roles for managing the SDDC. CloudAdmin: ? Includes the necessary privileges for creating and managing workloads for an SDDC ? Does not allow changing the configuration of certain management components that are supported and managed by VMware, such as hosts, clusters, and management VMs CloudGlobalAdmin: ? Associated with global privileges ? Allows you to create and manage content library objects and perform other global tasks For more information about roles used in VMware Cloud on AWS, see "vSphere Administration in VMware Cloud on AWS" in the VMware Cloud on AWS Documentation at https://docs.vmware.com/en/VMware-Cloud-on-AWS/ind

   4. K

      Kristina95

      2024-05-13

      Selected B1 upvote

      The CloudAdmin role has the privileges necessary to create and manage SDDC workloads and related objects such as storage policies, content libraries, vSphere tags, and resource pools. Reference： https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-operations/GUID-7458E592-FC6E-43A8-B0BE-505B1435D12D.html

3. Question 3 of 25

   A customer is looking to leverage a VMware Public Cloud solution to provide them with additional compute capacity as seasonal demand increases for their online business. The current on-premises data center is configured as follows: VMware vSphere 7.0 - VMware vSphere Distributed Switch (vDS) 7.0 Management and Server network - 172.18.0.0/16 vMotion network - 192.168.120.0/24 250 application servers Given the information in the scenario, which capability of VMware HCX will the customer not be able to utilize?

   • ACold migration
   • BLayer 2 extension
   • CBulk migration
   • DWAN optimization

   Show answer

   Correct answer: B

   How others answered

   • B100%

   Explanation

   I think the correct answer is B. In this case, Management and Servers are in the same network, but vSphere infrastructure networks cannot be extended: https://docs.vmware.com/en/VMware-HCX/4.6/hcx-user-guide/GUID-DBDB4D1B-60B6-4D16-936B-4AC632606909.html

   Adapted from community discussion by roundjump76 · 2023-09-17 · 3 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

   Supporting references

   • docs.vmware.com documentation
   • docs.vmware.com documentation

   View community discussion4

   Candidate context

   Question 3 discussion

   These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

   1. R

      roundjump76

      2023-09-17

      3 upvotes

      I think the correct answer is B. In this case, Management and Servers are in the same network, but vSphere infrastructure networks cannot be extended: https://docs.vmware.com/en/VMware-HCX/4.6/hcx-user-guide/GUID-DBDB4D1B-60B6-4D16-936B-4AC632606909.html

   2. N

      nemisis95

      2023-12-13

      Selected B1 upvote

      B. Layer 2 extension Management “and Server” network - 172.18.0.0/16 “and Server” being the 250 application servers. https://docs.vmware.com/en/VMware-HCX/4.6/hcx-user-guide/GUID-DBDB4D1B-60B6-4D16-936B-4AC632606909.html Detected and Restricted Source Network Types The HCX Network Extension service detects and prevents several non-supported Network Extension scenarios (items are dimmed in the Network Extension UI): • vSphere infrastructure networks (ESXi VMkernel networks).

   3. M

      Manu62

      2024-04-16

      1 upvote

      Given the scenario, one notable piece of information is the version of VMware vSphere being used: vSphere 7.0. last update, HCX doesn't support vMotion-based migrations (like Bulk migration) with VMware vSphere 7.0. Therefore, the correct answer is: C. Bulk migration Bulk migration leverages vMotion and is primarily used to move multiple virtual machines without downtime, but given the version incompatibility, the customer would not be able to utilize this feature with vSphere 7.0. The other features, like cold migration, layer 2 extension, and WAN optimization, do not have this specific limitation.

   4. Z

      zakuro2377

      2023-09-26

      Selected B1 upvote

      correct answer is B. To utilize the Layer 2 extension feature of VMware HCX, a vSphere Distributed Switch (vDS) is required in both the on-premises and VMware Cloud on AWS environments. However, as stated in the scenario, the on-premises environment already has a vDS in place. Therefore, this feature can be utilized.

4. Question 4 of 25

   Select 2

   Which two steps should an administrator take to allow HTTPS access to a specific virtual machine (VM) through the public Internet for VMware Cloud on AWS? (Choose two.)

   • ACreate a custom service called HTTPS using port 443.
   • BConfigure AWS Direct Connect.
   • CConfigure a SNAT rule translating an internal IP address to a public IP address.
   • DRequest a public IP address in the VMware Cloud console.
   • EConfigure a DNAT rule translating a public IP address to an internal IP address.

   Show answer

   Correct answer: D, E

   How others answered

   • DE86%

   Explanation

   I believe the correct answer is DE. HTTPS is already defined as a service, and there is no need to create a customized service for it. https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-networking-security/GUID-0E34C56D-C49C-49B6-A9CF-FBFAF14A126C.html

   Adapted from community discussion by casablankino · 2023-12-05 · 4 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

   Supporting references

   • docs.vmware.com documentation
   • docs.vmware.com documentation

   View community discussion4

   Candidate context

   Question 4 discussion

   These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

   1. C

      casablankino

      2023-12-05

      4 upvotes

      I believe the correct answer is DE. HTTPS is already defined as a service, and there is no need to create a customized service for it. https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-networking-security/GUID-0E34C56D-C49C-49B6-A9CF-FBFAF14A126C.html

   2. K

      krkmar

      2023-10-13

      Selected D, E3 upvotes

      https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-networking-security/GUID-DD72B243-1D08-4B6F-8A73-A745E8B0DC81.html

   3. F

      Franzcisco

      2024-01-24

      Selected D, E2 upvotes

      correct answer is DE. HTTPS is already defined as a service, and there is no need to create a customized service for it. Public IP and DNAT are needed

   4. I

      IAZZUS

      2024-12-05

      Selected D, E1 upvote

      D. Request a public IP address in the VMware Cloud console. This step is necessary to obtain a public IP address that can be used for external access to the VM. E. Configure a DNAT rule translating a public IP address to an internal IP address. This step is required to map the public IP address to the internal IP address of the VM, allowing external traffic to reach the VM.

5. Question 5 of 25

   A cloud administrator is asked to evaluate a number of disaster recovery solutions for the business. The current on-premises environment is built around the latest version of VMware vSphere 7.0. The following requirements must be met: Follow an on-demand cloud consumption model Must be a managed offering - Deliver a recovery point objective (RPO) of no more than 30 minutes Rapid power-on of recovered virtual machines, assuming cloud capacity availability Must accommodate for single region failure Which solution would meet these requirements?

   • AVMware Cloud Disaster Recovery
   • BVMware Cloud on AWS Stretched Cluster
   • CVMware vSphere Replication
   • DVMware Site Recovery Manager

   Show answer

   Correct answer: A

   How others answered

   • A100%

   Explanation

   VMware Cloud Disaster Recovery ----------------------------------------------------- * Protect your workloads running on VMware Cloud on AWS SDDC using high-frequency snapshots to achieve RPOs as low as 30 minutes. * Availability Zone Failure Handling https://docs.vmware.com/en/VMware-Cloud-Disaster-Recovery/services/vmware-cloud-disaster-recovery/GUID-067EE6DF-80CC-44D2-94E6-D7183A239D9A.html https://docs.vmware.com/en/VMware-Cloud-Disaster-Recovery/services/rn/vmware-cloud-disaster-recovery-release-notes/index.html

   Adapted from community discussion by bachusPL · 2024-03-07 · 5 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

   Supporting references

   • docs.vmware.com documentation
   • docs.vmware.com documentation
   • AWS documentation

   View community discussion4

   Candidate context

   Question 5 discussion

   These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

   1. B

      bachusPL

      2024-03-07

      Selected A5 upvotes

      VMware Cloud Disaster Recovery ----------------------------------------------------- * Protect your workloads running on VMware Cloud on AWS SDDC using high-frequency snapshots to achieve RPOs as low as 30 minutes. * Availability Zone Failure Handling https://docs.vmware.com/en/VMware-Cloud-Disaster-Recovery/services/vmware-cloud-disaster-recovery/GUID-067EE6DF-80CC-44D2-94E6-D7183A239D9A.html https://docs.vmware.com/en/VMware-Cloud-Disaster-Recovery/services/rn/vmware-cloud-disaster-recovery-release-notes/index.html

   2. M

      Marioalfo2

      2024-03-10

      Selected A4 upvotes

      VMware Cloud Disaster Recovery offers RPO times from 30 minutes to 24 hours Disaster recovery options for VMware Cloud on AWS: https://docs.aws.amazon.com/prescriptive-guidance/latest/disaster-recovery-vmware-cloud-on-aws/dr-options.html#vmware-cloud-disaster-recovery

   3. F

      Franzcisco

      2024-07-24

      Selected A1 upvote

      VCDR because an On-Demand model is asked for (cannot be strecthed cluster). VCDR allows 30m RPO.

   4. K

      krkmar

      2024-04-13

      Selected A1 upvote

      https://www.vmware.com/products/cloud-disaster-recovery.html

6. Question 6 of 25

   A cloud administrator is planning to migrate 1,000 VMs from their existing on-premises location into VMware Cloud on AWS. The migration will need to be completed as quickly as possible. Upon completion, the users will need the most reliable, lowest latency connection possible. Which on-premises data center connectivity option will meet these requirements?

   • ALayer 2 VPN
   • BAWS Direct Connect
   • CVMware Transit Connect
   • DIPsec VPN

   Show answer

   Correct answer: B

   How others answered

   • B100%

   Explanation

   SDDC supports integration with AWS Direct Connect service to provide persistent, reliable, and low latency connection to customers’ on-premises environments https://aws.amazon.com/es/blogs/apn/connectivity-options-for-vmware-cloud-on-aws-software-defined-data-centers/

   Adapted from community discussion by cheo · 2024-03-18 · 7 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

   Supporting references

   • AWS documentation

   View community discussion3

   Candidate context

   Question 6 discussion

   These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

   1. C

      cheo

      2024-03-18

      Selected B7 upvotes

      SDDC supports integration with AWS Direct Connect service to provide persistent, reliable, and low latency connection to customers’ on-premises environments https://aws.amazon.com/es/blogs/apn/connectivity-options-for-vmware-cloud-on-aws-software-defined-data-centers/

   2. R

      Rinjanisim

      2024-08-06

      1 upvote

      AWS Direct Connect is the dedicated point to point with the lowest latency at a premium cost

   3. V

      VirtualSteveO

      2024-10-27

      1 upvote

      The most reliable, lowest latency connection possible is B; DX

7. Question 7 of 25

   Select 2

   Which two networking planes are converged in a VMware NSX-T Data Center? (Choose two.)

   • AControl Plane
   • BI/O Plane
   • CManagement Plane
   • DConsumption Plane
   • EData Plane

   Show answer

   Correct answer: A, C

   How others answered

   • AC100%

   Explanation

   Quote from https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/installation/GUID-10B1A61D-4DF2-481E-A93E-C694726393F9.html The convergence of management and control plane nodes reduces the number of virtual appliances that must be deployed and managed by the NSX-T Data Center administrator

   Adapted from community discussion by krkmar · 2023-04-13 · 2 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

   Supporting references

   • docs.vmware.com documentation

   View community discussion4

   Candidate context

   Question 7 discussion

   These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

   1. M

      Marioalfo2

      2023-03-07

      6 upvotes

      The correct answers are: A. Control Plane C. Management Plane Overview of NSX-T Data Center: https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/installation/GUID-10B1A61D-4DF2-481E-A93E-C694726393F9.html

   2. J

      Jasongood

      2023-04-13

      Selected A, C3 upvotes

      Agree with Mario, as per "The convergence of management and control plane nodes reduces the number of virtual appliances that must be deployed and managed by the NSX-T Data Center administrator."

   3. K

      krkmar

      2023-04-13

      Selected A, C2 upvotes

      Quote from https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.2/installation/GUID-10B1A61D-4DF2-481E-A93E-C694726393F9.html The convergence of management and control plane nodes reduces the number of virtual appliances that must be deployed and managed by the NSX-T Data Center administrator

   4. K

      kachwan20

      2023-05-29

      Selected A, C2 upvotes

      The convergence of management and control plane nodes reduces the number of virtual appliances that must be deployed and managed by the NSX-T Data Center administrator.

8. Question 8 of 25

   A cloud administrator with an existing virtual private cloud (VPC) needs to create a dedicated connection to VMware Cloud on AWS. Which connection type would meet this requirement?

   • APublic virtual interface
   • BAWS Direct Connect
   • CTransit virtual interface
   • DPrivate virtual interface

   Show answer

   Correct answer: C

   How others answered

   • C57%
   • D43%

   Only 57% agreed on this answer — treat it as contested rather than settled.

   Explanation

   Answer is C - Transit Virtual Interface (Transit VIF) This interface type is associated with an AWS Direct Connect Gateway that’s attached to a VMware Transit Connect. VMware Transit Connect is a managed AWS Transit Gateway that acts as a distributed router to route traffic from on-premises to SDDC Groups, between SDDCs and Amazon VPCs in the cloud. This virtual interface type allows customers to advertise their on-premises networks, as well as ESXi management and vMotion networks to the SDDC from on-premises. https://aws.amazon.com/blogs/apn/aws-direct-connect-integration-with-vmware-cloud-on-aws/

   Adapted from community discussion by HornadyHero47 · 2023-09-15 · 3 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

   Supporting references

   • docs.vmware.com documentation
   • AWS documentation
   • AWS documentation
   • AWS documentation

   View community discussion4

   Candidate context

   Question 8 discussion

   These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

   1. H

      HornadyHero47

      2023-09-15

      3 upvotes

      Answer is C - Transit Virtual Interface (Transit VIF) This interface type is associated with an AWS Direct Connect Gateway that’s attached to a VMware Transit Connect. VMware Transit Connect is a managed AWS Transit Gateway that acts as a distributed router to route traffic from on-premises to SDDC Groups, between SDDCs and Amazon VPCs in the cloud. This virtual interface type allows customers to advertise their on-premises networks, as well as ESXi management and vMotion networks to the SDDC from on-premises. https://aws.amazon.com/blogs/apn/aws-direct-connect-integration-with-vmware-cloud-on-aws/

   2. M

      Marioalfo2

      2023-09-07

      2 upvotes

      I'm confused, the listed type of virtual interfaces are part of AWS Direct Connect, meant to connect SDDCs to on-prem DCs. AWS Direct Connect virtual interfaces https://docs.aws.amazon.com/directconnect/latest/UserGuide/WorkingWithVirtualInterfaces.html But one of the use cases of VMware Transit connect is SDDC to VPC: VMware Transit Connect – Simplifying Networking for VMC https://blogs.vmware.com/networkvirtualization/2020/09/vmware-transit-connect-simplifying-networking-for-vmc.html/

   3. M

      Marioalfo2

      2023-09-28

      Selected C2 upvotes

      The answer is C - Transit Virtual Interface (Transit VIF) This is also known as VMware Managed Transit Gateway (VTGW) in official VMware documentation: https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-operations/GUID-C957DBA7-16F5-412B-BB72-15B49B714723.html

   4. A

      aee63f0

      2024-09-28

      2 upvotes

      AI thinks it is "AWS Direct Connect". BUT! "However, within AWS Direct Connect, to establish a connection to a VMware Cloud on AWS environment, you would typically create a Private Virtual Interface (VIF). So, while "AWS Direct Connect" is the overarching service, "Private virtual interface" is the specific type of connection used to connect to VMware Cloud on AWS through AWS Direct Connect." The question was about "Specific connection type". which is "D" then.

9. Question 9 of 25

   A cloud administrator is tasked with moving critical business workloads between two VMware Cloud on AWS software-defined data centers (SDDCs) located in different geographical regions. The following requirements must be met: Migrate 300 virtual machines from region A to region B with minimal downtime of the applications. Non-disruptively resume application access of the targeted virtual machines in the event the migration fails. Support concurrent switch over of the application workloads to occur during a pre-defined maintenance window. Which VMware HCX migration type should be used to meet these requirements?

   • AVMware HCX Cold Migration
   • BVMware HCX Bulk Migration
   • CVMware HCX vMotion
   • DVMware HCX Replication Assisted vMotion

   Show answer

   Correct answer: D

   How others answered

   • D100%

   Explanation

   I believe the correct answer is: D. VMware HCX Replication Assisted vMotion Bulk Migration is limited to 100 VM jobs migrations at a time. "VMware HCX Replication Assisted vMotion (RAV) uses the HCX Interconnect appliance along with replication and vMotion technologies to provide large scale, parallel migrations with zero downtime." Understanding VMware HCX Replication Assisted vMotion: https://docs.vmware.com/en/VMware-HCX/4.6/hcx-user-guide/GUID-741F47D5-A3C9-4D74-9672-E54D8791D8F0.html#GUID-741F47D5-A3C9-4D74-9672-E54D8791D8F0

   Adapted from community discussion by Marioalfo2 · 2024-03-07 · 6 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

   Supporting references

   • docs.vmware.com documentation
   • docs.vmware.com documentation

   View community discussion4

   Candidate context

   Question 9 discussion

   These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

   1. M

      Marioalfo2

      2024-03-07

      6 upvotes

      I believe the correct answer is: D. VMware HCX Replication Assisted vMotion Bulk Migration is limited to 100 VM jobs migrations at a time. "VMware HCX Replication Assisted vMotion (RAV) uses the HCX Interconnect appliance along with replication and vMotion technologies to provide large scale, parallel migrations with zero downtime." Understanding VMware HCX Replication Assisted vMotion: https://docs.vmware.com/en/VMware-HCX/4.6/hcx-user-guide/GUID-741F47D5-A3C9-4D74-9672-E54D8791D8F0.html#GUID-741F47D5-A3C9-4D74-9672-E54D8791D8F0

   2. Z

      zakuro2377

      2024-03-26

      Selected D4 upvotes

      The correct VMware HCX migration type to use is VMware HCX Replication Assisted vMotion. With this method, data migration is done incrementally and continuous synchronization of differential data is performed, minimizing the impact on applications while migrating 300 virtual machines from region A to region B. Additionally, in the event of a migration failure, the migration can be aborted without interrupting application access to targeted virtual machines. Furthermore, it can support concurrent switch over of the application workloads during a maintenance window. B is incorrect. VMware HCX Bulk Migration is best for migrating a large amount of data at once, but it is not the appropriate solution for this scenario where minimal downtime for application migration is required.

   3. H

      HornadyHero47

      2024-03-15

      3 upvotes

      The selected answer is correct - Bulk Migrations. The key line is the concurrent switchover piece which is done with bulk migration, but not with RAV (Serial) https://docs.vmware.com/en/VMware-HCX/4.6/hcx-user-guide/GUID-20EA2946-57CD-4A87-AE25-866E5336AEA9.html

   4. S

      Shelby21

      2024-05-10

      2 upvotes

      D is correct: VMware HCX Replication Assisted vMotion provides an option to non-disruptively resume application access of the targeted virtual machines in the event the migration fails

10. Question 10 of 25

    Select 2

    When preparing to deploy VMware Cloud on Dell EMC or VMware Cloud on AWS Outposts in a data center, which two physical constraints must be considered? (Choose two.)

    • AHaving enough existing rack space for the components
    • BDistance between loading dock and datacenter
    • CSize of the doorways between loading dock and datacenter
    • DHaving enough people to carry the equipment
    • EFloor and elevator weight capacity between loading dock and datacenter

    Show answer

    Correct answer: C, E

    How others answered

    • CE100%

    Explanation

    The correct answers are: C. Size of the doorways between loading dock and datacenter E. Floor and elevator weight capacity between loading dock and datacenter When deploying VMware Cloud on Dell EMC or VMware Cloud on AWS Outposts, the Dell or AWS guys will bring a populated rack to the on-prem DC to extend the private cloud. They will bring technisians on-site to carry, install and configure the devices. AWS Outposts rack hardware specs: https://aws.amazon.com/outposts/rack/hardware-specs/?nc=sn&loc=4 https://docs.vmware.com/en/VMware-Cloud-on-Dell-EMC/services/vmc.dell.emc.datasheet/GUID-9252D1FC-FE9C-4317-8EEB-4C019A21CAA9.html

    Adapted from community discussion by Marioalfo2 · 2023-09-07 · 7 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

    Supporting references

    • AWS documentation
    • docs.vmware.com documentation

    View community discussion3

    Candidate context

    Question 10 discussion

    These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

    1. M

       Marioalfo2

       2023-09-07

       7 upvotes

       The correct answers are: C. Size of the doorways between loading dock and datacenter E. Floor and elevator weight capacity between loading dock and datacenter When deploying VMware Cloud on Dell EMC or VMware Cloud on AWS Outposts, the Dell or AWS guys will bring a populated rack to the on-prem DC to extend the private cloud. They will bring technisians on-site to carry, install and configure the devices. AWS Outposts rack hardware specs: https://aws.amazon.com/outposts/rack/hardware-specs/?nc=sn&loc=4 https://docs.vmware.com/en/VMware-Cloud-on-Dell-EMC/services/vmc.dell.emc.datasheet/GUID-9252D1FC-FE9C-4317-8EEB-4C019A21CAA9.html

    2. V

       VCIX_Chris

       2024-07-22

       Selected C, E1 upvote

       A is nonsense, because the AWS Outposts come as complete racks. B is nonsense, because the distance is generally irrelevant. D is nonsense, because if you have the correct equipment, you can move the AWS Outposts wioth only one person. The correct answers clearly are C and E, because they are show stoppers.

    3. V

       VirtualSteveO

       2024-04-27

       1 upvote

       Outpost racks are taller than usual DC racks and fully populated, this caused some issues with being to heavy for floors and elevators!, I would say C & E

11. Question 11 of 25

    Select 2

    A virtual machine running in VMware Cloud on AWS is experiencing poor CPU performance. What are two steps the cloud administrator can take to troubleshoot this issue? (Choose two.)

    • APhysically access the console of the VMware ESXi host where the virtual machine resides and use the command line to review the logs.
    • BUse the Troubleshooting Workbench in VMware vRealize Operations Cloud to look for potential evidence.
    • CSet the power management policy on the VMware ESXi host to “High Performance.”
    • DLog in to the VMware ESXi host using SSH and run ‘esxtop’ to examine CPU statistics.
    • EUse the VMware vSphere Client to connect to the VMware vCenter which manages the virtual machine and examine its performance statistics.

    Show answer

    Correct answer: B, E

    How others answered

    • BE100%

    Explanation

    "C" is wrong, there is no access for the customer to the managament policy settings. "D" answer is wrong. There is no access to ESXi ssh/esxtop. "It is a good idea to periodically monitor the CPU usage of the host. This can be done through the vSphere Client, using the VMware vRealizeOperations management suite, or by using resxtop. Below we describe how to interpret resxtop" https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/vmc-aws-performance.pdf So, the correct answers: B,E

    Adapted from community discussion by bachusPL · 2024-03-07 · 10 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

    Supporting references

    • docs.vmware.com documentation

    View community discussion4

    Candidate context

    Question 11 discussion

    These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

    1. B

       bachusPL

       2024-03-07

       Selected B, E10 upvotes

       "C" is wrong, there is no access for the customer to the managament policy settings. "D" answer is wrong. There is no access to ESXi ssh/esxtop. "It is a good idea to periodically monitor the CPU usage of the host. This can be done through the vSphere Client, using the VMware vRealizeOperations management suite, or by using resxtop. Below we describe how to interpret resxtop" https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/vmc-aws-performance.pdf So, the correct answers: B,E

    2. B

       BarkingSpider

       2024-12-08

       Selected B, E1 upvote

       A, C, and D are things you are explicitly NOT allowed to do on VMware on AWS. That only leaves 2 options left, and it says to choose 2, so this answer is easy.

    3. [

       [Removed]

       2024-06-23

       Selected B, E1 upvote

       Totally agree with previous comment, the correct answers are B&E, no possible access to a physical DC, access to the ESXi ssh or the management power policy

    4. R

       Rinjanisim

       2024-08-06

       1 upvote

       The question is referring to a single VM. Any answers pertaining to ESXi host should be out. Troubleshooting workbench “B” and vsphere client to access the Vm “E” are correct

12. Question 12 of 25

    A cloud administrator is deploying a new software-defined data center (SDDC) in VMware Cloud on AWS. Long-term planning indicates that a minimum of 30 hosts are required. What is a valid management network CIDR based on the requirements?

    • A10.4.0.0/23
    • B10.3.0.0/24
    • C10.2.0.0/16
    • D10.1.0.0/20

    Show answer

    Correct answer: D

    How others answered

    • D100%

    Explanation

    Agreed with this answer, attaching the AWS official documentation: SDDC Deployment and Best Practices Guide on AWS https://docs.aws.amazon.com/whitepapers/latest/sddc-deployment-and-best-practices/account-requirements.html Section Infrastructure preparation and planning - Table 1 — Design considerations

    Adapted from community discussion by Marioalfo2 · 2023-09-08 · 4 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

    Supporting references

    • AWS documentation

    View community discussion4

    Candidate context

    Question 12 discussion

    These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

    1. R

       roundjump76

       2023-09-03

       12 upvotes

       D /16 = 4091 hosts /20 = 251 hosts /23 = 27 hosts https://blogs.vmware.com/cloud/2019/10/03/selecting-ip-subnets-sddc/

    2. M

       Marioalfo2

       2023-09-08

       4 upvotes

       Agreed with this answer, attaching the AWS official documentation: SDDC Deployment and Best Practices Guide on AWS https://docs.aws.amazon.com/whitepapers/latest/sddc-deployment-and-best-practices/account-requirements.html Section Infrastructure preparation and planning - Table 1 — Design considerations

    3. H

       HeyItsMe2

       2024-03-20

       2 upvotes

       Isn't it C? Based on: Reserved Address Ranges in SDDC Networks n 10.0.0.0/15 n 172.31.0.0/16 These ranges are reserved within the SDDC management subnet, but can be used in your on-premises networks or SDDC compute network segments.

    4. D

       dmveron

       2024-07-30

       1 upvote

       C A /16 is overkill, but 10.0.0.0/15 is one of the reserved IP ranges. Trick question.

13. Question 13 of 25

    A cloud administrator is looking to migrate several dozen workloads from their on-premises location to a VMware public cloud using the vMotion feature of VMware HCX. A total of three networks will need to be stretched for the migration. They will also be utilizing the capabilities of the WAN appliance to optimize migration traffic. Based on this scenario, how many IP addresses would need to be reserved for the on-premises deployment of VMware HCX?

    • Afour
    • Bfive
    • Cthree
    • Dsix

    Show answer

    Correct answer: A

    How others answered

    • A53%
    • B41%

    Only 53% agreed on this answer — treat it as contested rather than settled.

    Explanation

    I think the correct answer is 4: HCX Manager - 1 IP address HCX Interconnect (IX) - 1 IP address HCX Network Extension (NE) - 1 IP address (1 NE appliance can extend 8 networks) 1 IP address for the On-Premises vMotion Network The HCX-WAN-OPT appliance doesn't require an IP address, it automatically uses the Management Network segment configured during the HCX-WAN-IX deployment. It is auto-assigned special use HCX internal RFC-5735 addresses for communications with the HCX-WAN-IX

    Adapted from community discussion by Shelby21 · 2024-05-22 · 7 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

    Supporting references

    • repost.aws documentation
    • repost.aws documentation

    View community discussion4

    Candidate context

    Question 13 discussion

    These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

    1. S

       Shelby21

       2024-05-22

       Selected A7 upvotes

       I think the correct answer is 4: HCX Manager - 1 IP address HCX Interconnect (IX) - 1 IP address HCX Network Extension (NE) - 1 IP address (1 NE appliance can extend 8 networks) 1 IP address for the On-Premises vMotion Network The HCX-WAN-OPT appliance doesn't require an IP address, it automatically uses the Management Network segment configured during the HCX-WAN-IX deployment. It is auto-assigned special use HCX internal RFC-5735 addresses for communications with the HCX-WAN-IX

    2. R

       roundjump76

       2024-03-17

       4 upvotes

       I also think is 4 IPs: "Deploy HCX On-Premises You will need the following before you can deploy HCX on premises 3 private IP Addresses from the on premises Management Network, these are for the HCX Manager, HCX Interconnect and HCX Network Extension appliances 1 private IP address from the On-Premises vMotion Network" https://repost.aws/articles/AROT7OId_pT7mwsyzOZlhbqA/hybrid-cloud-extension-hcx-install-guide-for-v-mware-cloud-on-aws

    3. J

       Jasongood

       2024-04-24

       Selected A2 upvotes

       Sorry can I correct myself again? I pick A. four this time HCX Manager - 1 IP address HCX Interconnect (IX) - 1 IP address HCX Network Extension (NE) - 1 IP address (1 NE can extend up to 8 networks, see below) HCX WAN Optimization (WANOP) - 1 IP address Extending Layer 2 Networks into AWS with Hybrid Cloud Extensions (HCX) https://repost.aws/articles/ARNqhoIYwFRk2-alghYZsNaw/extending-layer-2-networks-into-aws-with-hybrid-cloud-extensions-hcx See step 9

    4. F

       Felcam

       2024-03-14

       3 upvotes

       but it says that the deploy is on-prem, so they are the one-sided IPs. I would say 1 management ip, another for vmotion, another for the network extension, another for the wan optimization, 4 IP

14. Question 14 of 25

    A cloud administrator wants to view and manage workloads across both an on-premises environment and a VMware Cloud on AWS software-defined data center (SDDC). Which solution meets this requirement?

    • AEnhanced Linked Mode
    • BVMware HCX
    • CvCenter Single Sign-On
    • DHybrid Linked Mode

    Show answer

    Correct answer: D

    How others answered

    • D71%
    • A29%

    Only 71% agreed on this answer — treat it as contested rather than settled.

    Explanation

    My answer is D. Hybrid Linked Mode allows you to link your cloud vCenter Server instance with an on-premises vCenter Single Sign-On domain. https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-91C57891-4D61-4F4C-B580-74F3000B831D.html

    Adapted from community discussion by uchiken · 2024-05-06 · 2 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

    Supporting references

    • docs.vmware.com documentation

    View community discussion4

    Candidate context

    Question 14 discussion

    These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

    1. M

       Magiske

       2024-04-11

       4 upvotes

       I belive it should be Hybrid Link Mode ? https://vmc.techzone.vmware.com/resource/feature-brief-hybrid-linked-mode

    2. U

       uchiken

       2024-05-06

       Selected D2 upvotes

       My answer is D. Hybrid Linked Mode allows you to link your cloud vCenter Server instance with an on-premises vCenter Single Sign-On domain. https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws-manage-data-center-vms.doc/GUID-91C57891-4D61-4F4C-B580-74F3000B831D.html

    3. K

       Kristina95

       2024-11-13

       Selected D1 upvote

       Hybrid Linked Mode is a version of Enhanced Linked Mode that is built for VMware Cloud on AWS.

    4. V

       VCIX_Chris

       2024-11-23

       Selected D1 upvote

       Obviously D, because they don't talk about workload migration, but only visibilty

15. Question 15 of 25

    Which VMware Cloud tool would an administrator use to forward all the monitored traffic to a network appliance for analysis and remediation?

    • AvRealize Log Insight
    • BTraceflow
    • CPort mirroring
    • DIPFIX

    Show answer

    Correct answer: D

    How others answered

    • D67%
    • C33%

    Only 67% agreed on this answer — treat it as contested rather than settled.

    Explanation

    It is not practical to always set Port Mirroring. It is better to configure IPFIX and analyze with Network Insight. My answer is D.

    Adapted from community discussion by uchiken · 2024-05-05 · 2 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

    Supporting references

    • docs.vmware.com documentation

    View community discussion3

    Candidate context

    Question 15 discussion

    These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

    1. T

       TenaciousD

       2024-12-06

       3 upvotes

       C - Port Mirroring - https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-networking-security/GUID-3268A0D3-89D0-406F-B44F-156DD1A30E00.html

    2. U

       uchiken

       2024-05-05

       Selected D2 upvotes

       It is not practical to always set Port Mirroring. It is better to configure IPFIX and analyze with Network Insight. My answer is D.

    3. K

       Kristina95

       2024-11-13

       1 upvote

       C. Port mirroring is used in the following scenarios: Troubleshooting: Analyze the traffic to detect intrusion and debug and diagnose errors on a network. Compliance and monitoring: Forward all the monitored traffic to a network appliance for analysis and remediation.

16. Question 16 of 25

    A cloud administrator is notified by VMware that their VMware Cloud on AWS instance will be updated in seven days. Which action does the cloud administrator need to take to allow the update?

    • AAdd capacity.
    • BSelect a date for the upgrade.
    • CRespond to the notification.
    • DNothing needs to be done.

    Show answer

    Correct answer: D

    How others answered

    • D67%
    • B33%

    Only 67% agreed on this answer — treat it as contested rather than settled.

    Explanation

    Should be D. Upgrades for VMware Cloud on AWS SDDCs are deployed in a rollout across the service. When an upgrade rollout is available for your organization, you receive an email notification and a notification in the VMware Cloud Console. Typically, you receive this notification 30 to 60 days before upgrades begin for a rollout. After you receive the notification, you can submit a scheduling request for any of your SDDCs. So respond is required for initial schedule. If you receive the notification 7 days before start, this means you already responded to the proposed date and agree on it. https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-operations/GUID-EE89B216-BE93-4A1A-9280-8F20E2A5266F.html https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-operations/GUID-7725CAAC-BBDB-4F80-991F-1D1ADDE12216.html#GUID-7725CAAC-BBDB-4F80-991F-1D1ADDE12216

    Adapted from community discussion by KZL · 2024-02-09 · 3 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

    Supporting references

    • docs.vmware.com documentation
    • docs.vmware.com documentation

    View community discussion3

    Candidate context

    Question 16 discussion

    These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

    1. K

       KZL

       2024-02-09

       Selected D3 upvotes

       Should be D. Upgrades for VMware Cloud on AWS SDDCs are deployed in a rollout across the service. When an upgrade rollout is available for your organization, you receive an email notification and a notification in the VMware Cloud Console. Typically, you receive this notification 30 to 60 days before upgrades begin for a rollout. After you receive the notification, you can submit a scheduling request for any of your SDDCs. So respond is required for initial schedule. If you receive the notification 7 days before start, this means you already responded to the proposed date and agree on it. https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-operations/GUID-EE89B216-BE93-4A1A-9280-8F20E2A5266F.html https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-operations/GUID-7725CAAC-BBDB-4F80-991F-1D1ADDE12216.html#GUID-7725CAAC-BBDB-4F80-991F-1D1ADDE12216

    2. M

       Manu62

       2024-04-16

       3 upvotes

       D. Nothing needs to be done. VMware Cloud on AWS is a managed service, and VMware handles the updates and patches to the infrastructure. When VMware notifies customers of upcoming maintenance or updates, it is usually for informational purposes, so the customer is aware. Unless there's a specific action item mentioned in the notification (which would be unusual), no action is required from the customer's end.

    3. M

       Magiske

       2023-10-13

       2 upvotes

       When an SDDC update is upcoming, VMware sends a notification email to you. Typically, this occurs 7 days before a regular update and 1-2 days before an emergency update. Delays to upgrades could result in your SDDC running an unsupported software version. https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-operations/GUID-EE89B216-BE93-4A1A-9280-8F20E2A5266F.html I blive it's D?

17. Question 17 of 25

    Which Tanzu Kubernetes Grid component provides authentication, ingress, logging and service discovery?

    • ATanzu Supervisor cluster
    • BTanzu CLI
    • CTanzu Kubernetes cluster
    • DTanzu Kubernetes Grid extensions

    Show answer

    Correct answer: D

    How others answered

    • D67%
    • A33%

    Only 67% agreed on this answer — treat it as contested rather than settled.

    Explanation

    D: https://docs.vmware.com/en/VMware-Tanzu-Kubernetes-Grid/index.html Tanzu Kubernetes Grid provides packaged services such as networking, authentication, ingress control, and logging that a production Kubernetes environment requires.

    Adapted from community discussion by Magiske · 2023-04-14 · 3 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

    Supporting references

    • docs.vmware.com documentation

    View community discussion4

    Candidate context

    Question 17 discussion

    These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

    1. M

       Magiske

       2023-04-14

       3 upvotes

       D: https://docs.vmware.com/en/VMware-Tanzu-Kubernetes-Grid/index.html Tanzu Kubernetes Grid provides packaged services such as networking, authentication, ingress control, and logging that a production Kubernetes environment requires.

    2. R

       Redrock59

       2023-05-10

       Selected D2 upvotes

       D, per the following. https://docs.vmware.com/en/VMware-Tanzu-Kubernetes-Grid/index.html

    3. G

       Gayan84

       2024-06-26

       Selected D1 upvote

       The selected answer for me is D . Tanzu Kubernetes Grid extensions, also known as Tanzu packaged services, offer additional functionalities on top of the core Kubernetes cluster. These extensions include services for authentication, ingress control, logging, service discovery, and more.

    4. K

       kachwan20

       2023-05-30

       Selected D1 upvote

       Tanzu Kubernetes Grid Extensions (Shared Services) includes binaries for tools that provide in-cluster and shared services. All the provided binaries and container images are built and signed by VMware.

18. Question 18 of 25

    Select 2

    Which two steps must an administrator take in order to deploy an instance of Azure VMware Solutions? (Choose two.)

    • ACreate a support request with Microsoft Azure Support to create a host quota.
    • BDeploy and configure Microsoft Enterprise Edge (MSEE) appliances.
    • CCreate a support request with VMware Support to create a private cloud.
    • DAssociate the subscription with a Microsoft Enterprise Agreement.
    • EDeploy and Configure Microsoft Azure ExpressRoute.

    Show answer

    Correct answer: A, D

    How others answered

    • AD80%

    Explanation

    https://learn.microsoft.com/en-us/azure/azure-vmware/plan-private-cloud-deployment#identify-the-subscription --> Identify the Azure subscription, resource group, region, and resource name (The subscription must be associated with a Microsoft Enterprise Agreement (EA), a Cloud Solution Provider (CSP) Azure plan, or a Microsoft Customer Agreement (MCA) and then: Identify the size hosts and determine the number of clusters and hosts --> Request a host quota for an eligible Azure plan Identify the /22 CIDR IP segment for private cloud management Identify a single network segment Define the virtual network gateway Define VMware HCX network segments

    Adapted from community discussion by aee63f0 · 2024-03-28 · 2 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

    Supporting references

    • Microsoft Learn
    • Microsoft Learn

    View community discussion4

    Candidate context

    Question 18 discussion

    These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

    1. A

       aee63f0

       2024-03-28

       Selected A, D2 upvotes

       https://learn.microsoft.com/en-us/azure/azure-vmware/plan-private-cloud-deployment#identify-the-subscription --> Identify the Azure subscription, resource group, region, and resource name (The subscription must be associated with a Microsoft Enterprise Agreement (EA), a Cloud Solution Provider (CSP) Azure plan, or a Microsoft Customer Agreement (MCA) and then: Identify the size hosts and determine the number of clusters and hosts --> Request a host quota for an eligible Azure plan Identify the /22 CIDR IP segment for private cloud management Identify a single network segment Define the virtual network gateway Define VMware HCX network segments

    2. G

       Gayan84

       2024-06-26

       Selected A, D1 upvote

       Let's break down why the other options are not required for initial deployment: B. Deploy and configure Microsoft Enterprise Edge (MSEE) appliances: MSEE appliances are typically used for hybrid cloud connectivity scenarios and not strictly mandatory for deploying a basic Azure VMware Solution private cloud. C. Create a support request with VMware Support to create a private cloud: While VMware provides support for Azure VMware Solutions, creating the private cloud itself happens through Azure portal or Azure CLI, not requiring direct involvement from VMware Support. E. Deploy and Configure Microsoft Azure ExpressRoute: ExpressRoute allows private connections to Azure, but it's not essential for initial deployment. You can utilize the public internet for initial configuration and later establish ExpressRoute for enhanced security or performance.

    3. J

       Jasongood

       2023-04-22

       Selected A, D3 upvotes

       I think the model answer AD is correct, see this Microsoft KB on setting up Azure VMware solution https://learn.microsoft.com/en-us/azure/azure-vmware/plan-private-cloud-deployment#request-a-host-quota

    4. M

       Manu62

       2023-10-16

       1 upvote

       Azure VMware Solution (AVS) is a service provided by Microsoft in partnership with VMware that enables users to run VMware workloads natively on Azure. To set up an Azure VMware Solution instance: A. Before deploying the Azure VMware Solution private cloud, a host quota is required. The user must create a support request with Microsoft Azure Support to increase the quota for Azure VMware Solution hosts in the chosen region. E. Azure VMware Solution requires an ExpressRoute circuit to connect to the on-premises network. ExpressRoute provides a dedicated and private connection between the user's on-premises infrastructure and Azure. The other options listed are not required for the deployment of an Azure VMware Solution instance.

19. Question 19 of 25

    Select 2

    A cloud administrator is asked to configure access to the VMware Cloud Services Console based on the following requirement: Groups and users should be synchronized from the internal Active Directory Which two options should the administrator configure to meet this requirement? (Choose two.)

    • AWorkspace ONE Access connector
    • BEnterprise federation with dynamic (connectorless) authentication setup
    • CSAML 2.0 Identity Provider
    • DEnterprise federation with connector-based authentication setup
    • EWorkspace ONE Assist

    Show answer

    Correct answer: A, C

    How others answered

    • AC67%
    • AD33%

    Only 67% agreed on this answer — treat it as contested rather than settled.

    Explanation

    A. Workspace ONE Access connector D. Enterprise federation with connector-based authentication setup Explanation: To synchronize groups and users from the internal Active Directory to the VMware Cloud Services Console, the administrator should: A. Deploy a Workspace ONE Access connector. This connector integrates with the on-premises Active Directory to synchronize users and/or groups to Workspace ONE Access. D. Set up Enterprise federation with connector-based authentication. This setup uses the Workspace ONE Access connector to authenticate and sync users/groups from the on-premises Active Directory. The other options listed are not specifically required for this synchronization and authentication requirement.

    Adapted from community discussion by Manu62 · 2023-10-16 · 4 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

    Supporting references

    • docs.vmware.com documentation

    View community discussion3

    Candidate context

    Question 19 discussion

    These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

    1. M

       Manu62

       2023-10-16

       4 upvotes

       A. Workspace ONE Access connector D. Enterprise federation with connector-based authentication setup Explanation: To synchronize groups and users from the internal Active Directory to the VMware Cloud Services Console, the administrator should: A. Deploy a Workspace ONE Access connector. This connector integrates with the on-premises Active Directory to synchronize users and/or groups to Workspace ONE Access. D. Set up Enterprise federation with connector-based authentication. This setup uses the Workspace ONE Access connector to authenticate and sync users/groups from the on-premises Active Directory. The other options listed are not specifically required for this synchronization and authentication requirement.

    2. D

       dmveron

       2024-01-30

       1 upvote

       Terribly worded Q&A, or at least very out-of-date. Multiple possible answers depending on whether you choose Dynamic (connectorless) authentication setup OR Connector-based authentication setup. See page 4 of https://docs.vmware.com/en/VMware-Cloud-services/services/setting-up-enterprise-federation-cloud-services.pdf

    3. 3

       365b0d1

       2025-01-08

       1 upvote

       its a discussion if you think they are correct state your reasoning

20. Question 20 of 25

    What is a prerequisite step to adding additional users to a Google Cloud VMware Engine’s vCenter (GCVE)?

    • AChange the default administrator password.
    • BAdd a user in Google Cloud Platform Identity and Access Management.
    • COpen a support ticket to escalate VMware vSphere privileges.
    • DEscalate VMware vSphere privileges in the GCVE portal.

    Show answer

    Correct answer: B

    Explanation

    A. Change the default administrator password. Explanation: When using Google Cloud VMware Engine (GCVE), before you can add additional users or make certain modifications to vCenter, you typically need to change the default administrator password. This is a standard security practice to ensure that only authorized users can make changes after the initial setup.

    Adapted from community discussion by Manu62 · 2024-04-16 · 4 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

    Supporting references

    • Google Cloud documentation

    View community discussion3

    Candidate context

    Question 20 discussion

    These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

    1. M

       Manu62

       2024-04-16

       4 upvotes

       A. Change the default administrator password. Explanation: When using Google Cloud VMware Engine (GCVE), before you can add additional users or make certain modifications to vCenter, you typically need to change the default administrator password. This is a standard security practice to ensure that only authorized users can make changes after the initial setup.

    2. D

       drprofmrgentom

       2024-07-14

       2 upvotes

       For GCVE, management of users requires escalated privileges.

    3. S

       spookyfox

       2024-09-26

       1 upvote

       https://cloud.google.com/vmware-engine/docs/private-clouds/howto-elevate-privilege Google Cloud VMware Engine privileges give vCenter users the privileges they need to perform normal operations. Some administrative functions require additional privileges in the private cloud vCenter. Answer D, I think

21. Question 21 of 25

    Select 2

    A cloud administrator is tasked with deploying two virtual machines (APP01 and APP02) to a software-defined data center (SDDC) with multiple clusters hosted in VMware Cloud on AWS based on the following requirements: APP01 and APP02 should NOT run on the same host. Only three hosts in the SDDC are entitled to run the software installed on these servers. All entitled hosts are in cluster 1. Which two actions should the administrator take to meet these requirements? (Choose two.)

    • ACreate a Disable DRS vMotion policy.
    • BCreate a VM-VM anti-affinity policy.
    • CDeploy APP01 to Cluster 1 and APP02 to cluster 2.
    • DCreate a VM-Host anti-affinity policy.
    • ECreate a VM-Host affinity policy.

    Show answer

    Correct answer: B, E

    How others answered

    • BE75%
    • AB25%

    Explanation

    I think the answer will be B, plus either D or E depending on the DRS group setup D. VM-Host anti-affinity policy - here I can have all other clusters except cluster1 in the DRS Host group, and set APP01 and APP02 MUST NOT run on that DRS Host group E. VM-Host affinity policy - the other way around of D, set the DRS Host group to only has the 3 hosts in cluster1, and set APP01 and APP02 MUST run that DRS Host group You can see D and E can achieve the same result. https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.resmgmt.doc/GUID-2FB90EF5-7733-4095-8B66-F10D6C57B820.html

    Adapted from community discussion by Jasongood · 2024-04-13 · 2 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

    Supporting references

    • docs.vmware.com documentation

    View community discussion4

    Candidate context

    Question 21 discussion

    These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

    1. J

       Jasongood

       2024-04-13

       Selected B, E3 upvotes

       Create a VM-VM anti-affinity policy: This policy ensures that APP01 and APP02 do not run on the same host. Create a VM-Host affinity policy: This policy is used to define the relationship between a group of virtual machines and a group of hosts. In this case, the administrator can create a policy that ensures APP01 and APP02 only run on the three entitled hosts within Cluster 1. This will restrict the virtual machines to run only on the specified hosts that are entitled to run the software installed on the servers.

    2. J

       Jayzp3

       2024-05-13

       2 upvotes

       correct answer is B and DB. Create a VM-VM anti-affinity policy to ensure that APP01 and APP02 are not placed on the same host. D. Create a VM-Host anti-affinity policy to restrict the placement of virtual machines to the entitled hosts in Cluster 1. Option A is not relevant to this scenario because DRS and vMotion are not used to restrict virtual machine placement. Option C is not a viable solution because it does not guarantee that APP01 and APP02 will not run on the same host. Option E is also not appropriate because the requirement is to restrict placement to specific hosts rather than direct virtual machines to specific hosts.

    3. J

       Jasongood

       2024-04-13

       2 upvotes

       I think the answer will be B, plus either D or E depending on the DRS group setup D. VM-Host anti-affinity policy - here I can have all other clusters except cluster1 in the DRS Host group, and set APP01 and APP02 MUST NOT run on that DRS Host group E. VM-Host affinity policy - the other way around of D, set the DRS Host group to only has the 3 hosts in cluster1, and set APP01 and APP02 MUST run that DRS Host group You can see D and E can achieve the same result. https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.resmgmt.doc/GUID-2FB90EF5-7733-4095-8B66-F10D6C57B820.html

    4. M

       Manu62

       2024-10-16

       2 upvotes

       Based on the provided requirements: APP01 and APP02 should NOT run on the same host: This requirement suggests the use of a VM-VM anti-affinity policy. Only three hosts in the SDDC are entitled to run the software installed on these servers and all entitled hosts are in cluster 1: This requirement suggests the use of a VM-Host affinity policy to ensure that the VMs run on specific hosts within Cluster 1. Therefore, the correct actions are: B. Create a VM-VM anti-affinity policy. E. Create a VM-Host affinity policy.

22. Question 22 of 25

    Select 2

    A cloud administrator is managing a VMware Cloud on AWS environment consisting of a single cluster with six hosts. There have been no changes made to the Elastic DRS configuration. In which two situations will Elastic DRS add another host to the cluster? (Choose two.)

    • AWhen availability zone failure occurs
    • BWhen memory utilization reaches 90%
    • CWhen network utilization reaches 90%
    • DWhen CPU utilization reaches 90%
    • EWhen storage utilization reaches 80%

    Show answer

    Correct answer: A, E

    How others answered

    • AE100%

    Explanation

    A and E are correct, by default, the SDDC clusters will use Elastic DRS Baseline policy Select Elastic DRS Policy: https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-operations/GUID-961C4B32-6093-4C2E-AFE5-5B1F56BF4EEE.html

    Adapted from community discussion by Marioalfo2 · 2023-03-09 · 4 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

    Supporting references

    • docs.vmware.com documentation

    View community discussion3

    Candidate context

    Question 22 discussion

    These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

    1. M

       Marioalfo2

       2023-03-09

       Selected A, E4 upvotes

       A and E are correct, by default, the SDDC clusters will use Elastic DRS Baseline policy Select Elastic DRS Policy: https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-operations/GUID-961C4B32-6093-4C2E-AFE5-5B1F56BF4EEE.html

    2. H

       Harusame_Top

       2023-02-27

       2 upvotes

       AE https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws-operations/GUID-961C4B32-6093-4C2E-AFE5-5B1F56BF4EEE.html#:~:text=In%20a%20new%20SDDC%2C%20Elastic,AWS%20Availability%20Zone%20failure%20occurs.

    3. V

       VirtualSteveO

       2023-10-27

       1 upvote

       The default EDRS policy only adds hosts based on storage consumption. If the cluster is multi-AZ then it will also do so on zone failure (in the remaining zone) So A & E

23. Question 23 of 25

    Select 4

    Which four steps must a cloud administrator take to deploy a new private cloud in Azure VMware Solution? (Choose four.)

    • AIdentify the maximum number of hosts needed for future capacity.
    • BIdentify the desired availability zone.
    • CIdentify a management CIDR of size /22.
    • DOpen a support request with Microsoft Azure requesting capacity.
    • EIdentify a management CIDR of size /20.
    • FIdentify the desired region.
    • GIdentify the current number of hosts needed.

    Show answer

    Correct answer: C, D, F, G

    How others answered

    • CDFG82%

    Explanation

    Correct answers are (In order based in options given) Identify the desired region. Identify the current number of hosts needed. Identify a management CIDR of size /22. Open a support request with Microsoft Azure requesting capacity. Plan the Azure VMware Solution deployment https://learn.microsoft.com/en-us/azure/azure-vmware/plan-private-cloud-deployment

    Adapted from community discussion by Marioalfo2 · 2023-09-05 · 13 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

    Supporting references

    • Microsoft Learn

    View community discussion4

    Candidate context

    Question 23 discussion

    These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

    1. M

       Marioalfo2

       2023-09-05

       13 upvotes

       Correct answers are (In order based in options given) Identify the desired region. Identify the current number of hosts needed. Identify a management CIDR of size /22. Open a support request with Microsoft Azure requesting capacity. Plan the Azure VMware Solution deployment https://learn.microsoft.com/en-us/azure/azure-vmware/plan-private-cloud-deployment

    2. J

       Jayzp3

       2023-11-13

       2 upvotes

       correct answer are: C,D,F.G Planning your Azure VMware Solution deployment is critical for a successful production-ready environment for creating virtual machines (VMs) and migration. During the planning process, you'll identify and gather what's needed for your deployment. As you plan, make sure to document the information you gather for easy reference during the deployment. A successful deployment results in a production-ready environment for creating virtual machines (VMs) and migration. In this how-to article, you'll do the following tasks: Identify the Azure subscription, resource group, region, and resource name Identify the size hosts and determine the number of clusters and hosts Request a host quota for eligible Azure plan Identify the /22 CIDR IP segment for private cloud management Identify a single network segment Define the virtual network gateway Define VMware HCX network segments

    3. M

       Manu62

       2024-04-16

       1 upvote

       AFGC are the answers Option D is not a standard practice, as capacity in Azure should be managed via the Azure portal or APIs rather than manual support requests. Option E, a management CIDR of /20, provides an even larger address space than a /22 but might be excessive for most deployments. Option B, the availability zone, is more relevant for native Azure resources; AVS's availability and redundancy are managed differently. Option D is not a standard practice, as capacity in Azure should be managed via the Azure portal or APIs rather than manual support requests. Option E, a management CIDR of /20, provides an even larger address space than a /22 but might be excessive for most deployments. Option B, the availability zone, is more relevant for native Azure resources; AVS's availability and redundancy are managed differently.

    4. K

       krkmar

       2023-10-03

       Selected C, D, F, G2 upvotes

       https://learn.microsoft.com/en-us/azure/azure-vmware/plan-private-cloud-deployment In this article: Identify the region or location Determine the number of clusters and hosts Request a host quota Define the IP address segment for private cloud management hence CDFG

24. Question 24 of 25

    Select 3

    Which three functions are provided by the components within the Kubernetes control plane? (Choose three.)

    • ABalances pods across the nodes within a Kubernetes cluster.
    • BEnsures that containers are running in a pod.
    • CConfigures network rules to route traffic to containers within the Kubernetes cluster.
    • DStores Kubernetes cluster data in a key-value data store.
    • EWatches the API for changes and responds with appropriate actions.
    • FStores and distributes container images.

    Show answer

    Correct answer: A, D, E

    How others answered

    • ADE67%
    • BDE33%

    Only 67% agreed on this answer — treat it as contested rather than settled.

    Explanation

    I would say the correct answers are: https://www.examtopics.com/exams/vmware/2v0-33-22/view/2/# A. Balances pods across the nodes within a Kubernetes cluster. - Scheduler D. Stores Kubernetes cluster data in a key-value data store. - etcd E. Watches the API for changes and responds with appropriate actions. - Controller manager Kubernetes Components https://kubernetes.io/docs/concepts/overview/components/

    Adapted from community discussion by Marioalfo2 · 2023-09-05 · 11 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

    Supporting references

    • Kubernetes documentation

    View community discussion4

    Candidate context

    Question 24 discussion

    These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

    1. M

       Marioalfo2

       2023-09-05

       11 upvotes

       I would say the correct answers are: https://www.examtopics.com/exams/vmware/2v0-33-22/view/2/# A. Balances pods across the nodes within a Kubernetes cluster. - Scheduler D. Stores Kubernetes cluster data in a key-value data store. - etcd E. Watches the API for changes and responds with appropriate actions. - Controller manager Kubernetes Components https://kubernetes.io/docs/concepts/overview/components/

    2. M

       Manu62

       2024-04-16

       1 upvote

       BDE are the correct option : B. Ensures that containers are running in a pod. This function is managed by the kubelet, which communicates with the control plane to ensure containers are running in a Pod. However, strictly speaking, the kubelet runs on each node and is not part of the control plane. But the control plane does determine how many instances of your application should be running. D. Stores Kubernetes cluster data in a key-value data store. The etcd component is a consistent and highly-available key-value store used as Kubernetes' backing store for all cluster data. E. Watches the API for changes and responds with appropriate actions. The Controller Manager does this. It regulates controllers that handle state, such as ensuring the desired number of replicas for a deployment exists or handling node operations.

    3. K

       krkmar

       2023-10-12

       Selected A, D, E3 upvotes

       as per https://kubernetes.io/docs/concepts/overview/components/ other options do not fit

    4. K

       Kristina95

       2024-05-19

       Selected A, D, E1 upvote

       Kubernetes control plane has components as lists. Controller Manager: Runs the controllers that watch the API for changes and that respond with appropriate actions. Scheduler: Balances pods across the nodes within a Kubernetes cluster. API Server: Entry point into the Kubernetes platform. etcd: A key-value datastore where Kubernetes cluster data is stored, for example, cluster configuration and current state.

25. Question 25 of 25

    Which Tanzu Kubernetes Grid component is used to create, scale, upgrade and delete workload clusters?

    • ATanzu Kubernetes cluster
    • BTanzu CLI
    • CTanzu Supervisor cluster
    • DTanzu Kubernetes Grid extensions

    Show answer

    Correct answer: B

    How others answered

    • B75%
    • A25%

    Explanation

    Answer is A The Tanzu Kubernetes Grid component that is used to create, scale, upgrade, and delete workload clusters is the Tanzu Kubernetes cluster. Tanzu Kubernetes Grid (TKG) provides a consistent, upstream-compatible Kubernetes distribution that is packaged with the necessary tools and services to enable a secure and scalable production-grade Kubernetes deployment. Tanzu Kubernetes clusters can be created and managed using different deployment options, such as TKG standalone, TKG on vSphere with Tanzu, or TKG on AWS. Tanzu Kubernetes clusters can also be upgraded and deleted using the Tanzu CLI, which is a command-line interface tool that enables you to manage your Kubernetes clusters and applications on TKG. Tanzu Supervisor cluster and Tanzu Kubernetes Grid extensions are other TKG components that provide additional functionality for managing Kubernetes clusters and deploying applications, but they are not used specifically for creating, scaling, upgrading, or deleting workload clusters.

    Adapted from community discussion by Jayzp3 · 2023-11-13 · 3 community upvotes. Third-party contribution; reviewed by our quality filter, not independently verified.

    Supporting references

    • docs.vmware.com documentation
    • docs.vmware.com documentation
    • docs.vmware.com documentation

    View community discussion4

    Candidate context

    Question 25 discussion

    These are quality-filtered excerpts from third-party community discussion. They can be useful reasoning signals, but they are not official answers and have not been independently verified by 2V0-33.22 or CertExamHQ.

    1. J

       Jayzp3

       2023-11-13

       3 upvotes

       Answer is A The Tanzu Kubernetes Grid component that is used to create, scale, upgrade, and delete workload clusters is the Tanzu Kubernetes cluster. Tanzu Kubernetes Grid (TKG) provides a consistent, upstream-compatible Kubernetes distribution that is packaged with the necessary tools and services to enable a secure and scalable production-grade Kubernetes deployment. Tanzu Kubernetes clusters can be created and managed using different deployment options, such as TKG standalone, TKG on vSphere with Tanzu, or TKG on AWS. Tanzu Kubernetes clusters can also be upgraded and deleted using the Tanzu CLI, which is a command-line interface tool that enables you to manage your Kubernetes clusters and applications on TKG. Tanzu Supervisor cluster and Tanzu Kubernetes Grid extensions are other TKG components that provide additional functionality for managing Kubernetes clusters and deploying applications, but they are not used specifically for creating, scaling, upgrading, or deleting workload clusters.

    2. J

       JailBreak

       2023-10-30

       2 upvotes

       The Tanzu CLI is a command-line interface that provides a unified interface for interacting with various VMware Tanzu products, including Tanzu Kubernetes Grid. While it can be used to perform some operations on Tanzu Kubernetes Grid, it is not specifically designed for creating, scaling, upgrading, and deleting workload clusters. The correct answer is A. Tanzu Kubernetes cluster. Tanzu Kubernetes Grid (TKG) provides a Kubernetes runtime that is packaged and integrated with a set of open-source and commercial Kubernetes ecosystem components, all validated by VMware. Tanzu Kubernetes cluster is the TKG component used to create, scale, upgrade, and delete workload clusters.

    3. R

       RudeGrimmy

       2023-12-23

       Selected B1 upvote

       The answer is B Tanzu CLI is not necessarily a "Tanzu Grid Component" but a "Bootstrap Component" "After a Management cluster is created, the Tanzu CLI communicates with it to create, scale, upgrade, and delete Tanzu Kubernetes cluster." The above line in quotes was taken directly from the training coarse "Designing, Configuring, and Managing the VMWare Cloud.". Its in Module 6 (Modern Applications) in section "Tanzu Kubernetes Grid". Scroll down 3/4 of the way through the lesson and you will see it under "Bootstrap Machine Components."

    4. 4

       4nub1s

       2024-03-04

       2 upvotes

       Also, B it's where you type the actions .... the question is not ... well placed in my opinion it might Also be B instead of C :(

Keyboard:J Kmove between questionsA–Dselect an answerRshow or hide the answer← →change page

2V0-33.22 practice, question 1 of 25